PP3V8_AON
This is one of the earliest and most important power rails in the M-series power architecture.
It is created using an Apple exclusive Renesas RAA225501C, usually labeled U5700.
It appears to be an Apple-specific Renesas three-phase buck controller with customer-programmed OTP configuration. Apple schematics identify multiple versions such as:
353S02645 — RAA225501C, A2, OTP-R170353S02662 — RAA225501C, A1, OTP-ROC1353S02604 — RAA225501C, A2, OTP-ROC0353S02473 — RAA225501C, A1, OTP-ROC0
The controller uses a 32-pin QFN, three integrated gate-driver channels, three current-sense pairs, differential voltage sensing and I²C at address 0x36. The schematic also states that switching frequency is register-controlled.
That OTP qualification is important: even another RAA225501-series device with the identical footprint may start with a different voltage, frequency, phase configuration, current limit, protection thresholds or I²C behaviour. Therefore:
- RAA225501A/B: probably related and likely share much of the physical pinout, but cannot be considered drop-in replacements.
- Other RAA225501C variants: not necessarily interchangeable unless their Apple part number and OTP revision are known to work on that board.
- Publicly documented Renesas parts such as the ISL68200 have similar concepts—integrated driver, I²C, remote sensing and digital configuration—but are not pin-compatible; the ISL68200 is only single-phase.
- Older documented multiphase parts such as the ISL6322 are in different packages with completely different pinouts.
For an actual repair, the safe replacement is an exact RAA225501C/Apple 353Sxxxxx part with the correct OTP variant, preferably harvested from a compatible donor board. The board number and U5700 BOM option are more reliable than the top marking alone.