Skip to main content

Power Sequence

  1. VBUS attach: the CD3217s wake from their own LDOs and negotiate 5 V first, then 20 V once their firmware runs. PPBUS_AON should read around 12.3 V.
  2. PP3V8_AON: a buck from PPBUS_AON, then through the current-sense path into both PMUs.
    At startup only the first phase is active.
    Given the coils on phase 2&3 (`L5840`, `L5820`) are bigger than on phase 1 ('`L5800`), we can assume Phase 1 is the only active phase at startup or when in standby, and either P2/P3 take over when the device is on, or supplement P1.
    The buck controller is an Renesas `RAA225501C` (Apple P/N `353S02645`) - its data sheet is not available (.
  3. AON LDOs from MPMU and SPMU: 1V8_AON, 1V2_AON and 1V5_LDOINT per PMU, plus PP3V3_AON and a 5 V boost (BSTLQ). Charger current is ~30–40 mA at this stage.
  4. Wake event (button, lid, charger): the S2 rails come up, e.g. PP5V_S2, PP3V3_S2, PP1V8_S2, PP1V25_S2, PP0V88_S1, PP0V72_S2_VDD_LOW, PP1V2_AWAKE_PLL, PP0V855_S2SW_CIO, followed by the AWAKE/NAND rails.
  5. SoC starts, SPMI handshake with the PMUs, then S0 rails. This is the part I'm least sure of in detail.